
Best Power Rack With Pulley System in 2026
Compare six power rack and pulley setups by usable resistance, included catches, loading and complete cost, with model-specific limitations.
The best power rack with a pulley system should add cable exercises you will use without making barbell training harder to set up. A weight stack with a selector pin saves repeated plate changes between exercises.
I start with the cable movements that would earn their place in the program, then check whether the bench or barbell supports need moving to use them.
Only one qualifying complete rack-and-pulley configuration currently meets the requirements for our Top 3. The other five reviewed models serve as comparisons, with their lower or provisional scores explained below. Two featured positions remain unfilled in this researched selection.
One Qualified Pick From the Current Research
1. Body-Solid GPR400 + GLA400 + SP150 Stack
[Qualified Choice With a Selector Stack]
- Cage supplies hooks and full pin-and-pipe catches.
- GLA400 adds high and low fixed cable outlets.
- SP150 adds fifteen selector plates for convenient changes.

★★★★★
Amazon listing; may pool variants; checked October 18, 2026
Budget all three components and an 81-inch-deep installation envelope. A heavy seated-pulldown restraint is not included.
Shop on AmazonBody-Solid GPR400; cage onlyShop on AmazonRequired separate GLA400 high/low cable attachmentShop on AmazonRequired separate SP150; fifteen 10 lb plates only
Table of Contents
Best Power Rack With Pulley System: Six Full Reviews
These six full reviews compare a selector-stack high/low system with Smith, fixed-outlet, plate-loaded adjustable-cable and folding options. I compare the complete required purchases and explain when a model remains conditional, using original owner accounts.
| Model or complete setup | Distinct role | Our Score | Main condition |
|---|---|---|---|
| GPR400 + GLA400 + SP150 | Selector-stack fixed high/low | 8.5/10, qualified | Three separate components; no leg restraint |
| Marcy SM-4033 | Smith plus adjustable cables | 6.5/10, comparison | 300 lb bar/catch limit; substantial footprint |
| Mikolo K6 2.0 red | Adjustable cables | 3.5/10, provisional | Exact generation/width/anchoring conflicts |
| Sunny XF9933 + XF9927 | Plate-loaded fixed high/low | 5.0/10, provisional | Complete size and catch limit unconfirmed |
| F22 Standard black | Dual adjustable plate loading | 7.0/10, comparison | 2:1; plate changes and permanent space |
| Original CHEETAH black | Folding adjustable cables | 5.0/10, provisional | Missing approved complete catches |
1. Body-Solid GPR400 + GLA400 + SP150 Stack [Qualified Choice With a Selector Stack]
Our Score: 8.5/10 ★★★★★★★★★★ · Research-based
The documented cage, high/low attachment and approved selector stack form a useful complete barbell-plus-cable setup. Its permanent footprint, heavy assembly and overhead reach limits keep home practicality at 3/5.
I choose this three-part setup for a barbell cage with convenient selector-loaded high and low pulls. Buy the GPR400 cage, GLA400 attachment and SP150 stack separately. Its fixed outlets serve a different cable routine from an adjustable two-handle functional trainer.

Shop on AmazonBody-Solid GPR400; cage onlyShop on AmazonRequired separate GLA400 high/low cable attachmentShop on AmazonRequired separate SP150; fifteen 10 lb plates only
Body-Solid GPR400 + GLA400 + SP150 Stack Specs
| Required components | GPR400 cage + GLA400 + SP150 plates |
|---|---|
| Cage construction / claim | 11-gauge; 1,000 lb rack rating |
| Cage catches | Supplied J-cups and pin-and-pipe pair |
| Attachment planning envelope | 81 D x 53 W x 80 H in |
| SP150 stack | Fifteen 10 lb plates; no numerical handle-load claim |
| Included GLA400 parts | Lat bar, row bar, guide rods, top plate, selector mechanism |
| Observed component prices | $840 + $545 + $296.10 = $1,681.10 |
| Observed sellers / date | Strength Super Store; stores 123; Fitness Factory; October 18, 2026 |
| Investment Level | $$$ |
Key Features:
- Cage supplies a supported barbell bay.
- GLA400 adds separate high and low cable attachment points.
- Selector pin changes replace repeated loose-plate loading.
- Lat and row bars come with the attachment.
- One-inch bench-zone spacing supports hook positioning.
The footprint needs more room than the advertising suggests. GLA400's current specific physical specification gives 81 inches of depth, despite a separate claim of no extra space. I use the larger published envelope, then add exercise and loading access. The roughly 80-inch frame can fit a lower room, but a tall user may lose overhead reach. A bench and body position still need a real clearance check.
The original Amazon purchaser Recamundus reviewed all three components in 2025: the rack-and-lat setup was smooth, and the stack made changes easier than loose plates. Brian Mainville also described adding the stack. These are attributed individual reports, not a reliability survey. Other cage owners describe substantial assembly and pin-and-pipe catch handling.
No maker-published numerical handle ratio or plate-carriage maximum was established, so I make neither claim. The explicit SP150 stack option defines this purchase. A leg restraint is not included; do not improvise one or assume unrestricted heavy seated pulldowns. Follow the cable-tension and inspection instructions. Maker lifetime home coverage requires an authorized reseller and correct installation; seller authorization was not established for every observed offer.
Pros
- Supplied J-cups support the documented barbell bay.
- Selector stack simplifies cable changes.
- Cage catches are already supplied.
- High and low outlets cover accessories.
- Lat and row bars are included.
- One-inch bench-zone spacing supports finer hook positioning.
- Low frame suits measured permanent rooms.
Cons
- Three components cost and ship separately.
- 81-inch depth consumes substantial room.
- Tall users must check overhead reach.
- No leg restraint is included for heavy seated pulldowns.
Final Verdict
Choose this documented cage, high/low attachment and selector-stack configuration for a permanent mixed training station, within the room and pulldown limits explained in the review.
Shop on AmazonBody-Solid GPR400; cage onlyShop on AmazonRequired separate GLA400 high/low cable attachmentShop on AmazonRequired separate SP150; fifteen 10 lb plates only
2. Marcy SM-4033, Red [Alternative With a Smith Machine]
Our Score: 6.5/10 ★★★★★★★★★★ · Research-based
The SM-4033 fits a plan that uses Smith lifting, adjustable cables and the included bench. Substantial room and assembly demands reduce home practicality; component limits and individual cable complaints deserve careful ownership planning.
Retained lower-scoring alternative, assessed October 16, 2026. This does not meet the current Top 3 eligibility standard.
I would buy the SM-4033 when a guided Smith bar, adjustable cables and a bench are all parts of the training plan. Those functions explain the larger purchase better than a long exercise list. My first check would be the 300-pound bar and catch limits, followed by where the bench goes when it is time for standing cable work.

Marcy SM-4033, Red Specs
| Model | SM-4033, red |
|---|---|
| Cage size | 83.5 by 67.8 in footprint; 86.2 in high |
| Bench size | 63 L x 26.4 W x 53.9 H in |
| Bar and safety catches | 300 lb maximum |
| Smith bar | 300 lb maximum |
| Weight trolley | 300 lb total; 150 lb each side |
| Bench limit | 600 lb, including user and weights |
| User limit | 300 lb |
| Observed base-package price | $1,799.99; Amazon US listing, October 16, 2026 |
| Investment Level | $$$ |
Key Features:
- Height-adjustable cable outlets: provide several starting positions for cable exercises.
- Smith and free-bar functions: offer guided lifting and a separate bar-support arrangement.
- Included utility bench: adds an adjustable pressing surface and preacher pad.
- Shared plate loading: avoids buying a dedicated selectorized weight stack.
Picture a session that moves from pressing to cable flyes and rows. The included bench saves a separate purchase, but it still has to move out of the cable exercise position. The station's 83.5-by-67.8-inch footprint and the separate 63-by-26.4-inch bench dimensions cannot be added into a universal room size. Lay out each position, including plate loading and a place to park the bench, before deciding whether combining stations saves useful space.
On Marcy's SM-4033 page, Aaron Bloom praised the construction and exercise options but described an eight-hour assembly with poorly labeled parts. Brian Tessman reported repeated cable twisting and fraying despite replacements. Ty liked the adjustable cables after upgrading from an older Marcy, but preferred the old bench. These accounts have no dates in the accessible text and cannot establish how often faults occur. My priorities on delivery would be checking the parts before assembly and the bench fit before loading it.
Why We Chose This
I chose the SM-4033 for Smith lifting, adjustable cable origins and an included bench in one package. The Mikolo candidate serves free-bar and cable training without the guided bar, while Sunny concentrates on fixed high and low pulls. I would pay for the Marcy combination when each of those stations has a place in the program. An existing good bench and no interest in Smith lifting would push my choice toward a simpler setup.
Leave time for the cable routing and adjustment described in the manuals. Stop using a cable that twists, frays or fails to return, and have it inspected and corrected under the maker's guidance. Check the supplied bench's foot support and pressing position too. Being included does not guarantee it fits your body.
The load limits need the same care as the layout. The owner's manual gives 300 pounds for the bar and catches, 300 pounds total on the cable trolley and 150 pounds on each trolley side. The bench's 600-pound figure includes the user and weights. The resistance chart approximates full loaded weight at the low pulley and half at each crossover handle. Keep the manual's 100-pound storage-post limit despite the larger marketing-page figure. A separate free bar and plates remain additional purchases.
Pros
- Included adjustable utility bench supplies a pressing surface with the system
- Guided Smith bar station adds a distinct lifting option
- Height-adjustable front cable outlets provide several starting angles
- Separate free-bar support arrangement accommodates a suitable bar bought separately
- Low-pulley exercise position design adds pulling work without another machine
- Plate-loaded cable trolley system uses compatible plates instead of a selectorized stack
- Documented station-specific resistance chart explains low-pulley and crossover relationships
Cons
- The 300-pound bar and catch limits exclude some heavier lifting plans.
Final Verdict
I would choose the SM-4033 for Smith lifting and adjustable cables with a bench included. Allow assembly time, space for exercise changes and the 300-pound bar/catch limits. A simpler cage suits a program that already has a bench and does not use a guided bar.
3. Mikolo K6 2.0, Red Rack Only [Conditional Choice for Adjustable Cables]
Our Score: 3.5/10 ★★★★★★★★★★ · Research-based · Provisional
Adjustable cables and free-bar supports match the intended routine, but the red offer's generation, width and installation remain unresolved. Family-owner reports cannot verify its supplied parts, making the recommendation provisional and strongly conditional.
Retained lower-scoring alternative, assessed October 16, 2026. This does not meet the current Top 3 eligibility standard.
The red K6 2.0 interests me when adjustable cables are the missing part of a free-bar setup, but I would hold the order until its identity and installation are confirmed. This rack-only offer shows flip-down catches and movable cable outlets. Amazon's K6 2.0 title conflicts with K8 and A-K8-R technical fields, and its width differs from the current maker specification.

Mikolo K6 2.0, Red Rack Only Specs
| Selected offer | Red, K6 2.0 Power Cage Only |
|---|---|
| Amazon size | 67.5 D x 56.5 W x 86.4 H in |
| Current maker size | 67.5 D x 62.3 W x 86.5 H in; confirm drawing |
| Current maker frame | 2 x 2 in, 14-gauge |
| Current maker holes | 1 in diameter; 2 in spacing; 29 settings |
| Pulley ratio | 2:1, manufacturer claim |
| Maker component claims | 1,500 lb J-hooks; 1,200 lb safeties |
| Maker trolley claim | 600 lb loading; not handle resistance |
| Observed base-package price | $599.99; Amazon US listing, October 16, 2026 |
| Investment Level | $$ |
Key Features:
- Adjustable cable outlets: change the cable's starting height.
- Flip-down safeties: replace the original K6 generation's rod-style arrangement.
- Sandwich J-cups: support the free bar in the selected package.
- Leg anchor and footplate: provide bracing options for pulldowns and rows.
For a program that moves from barbell pressing to cable work, adjustable outlets let you choose a starting height near the shoulder, waist or ankle. The same uprights also carry the lifting supports, so changing exercises may involve clearing catches and repositioning the bench. Plan that changeover before counting the attachments. Check that the bench reaches the bar and that the cables, handles and your body have room through the next movement.
LivewireCK's October 2026 Reddit account describes a K6 2.0 with a weight-stack package, rather than this red rack-only offer. They liked the pulley action and J-cups but reported cable twisting, shifting during pull-ups and the need to remove safety arms for some cable movements. Check those transitions on the exact delivered version. Their loading system and purchase are different, so their experience cannot verify this package's parts, anchoring or stability.

Why We Chose This
I kept the K6 2.0 as a conditional choice for adjustable cable heights within a free-bar cage. It avoids buying the Marcy's Smith station and another bench when those are unnecessary. Sunny's fixed high and low outlets offer fewer starting positions. I would choose the K6 only after its exact generation, width and assembly or anchoring instructions are settled in writing.
The maker's review feed includes Marsel H., who found assembly manageable but described some shaking, and Reis T., who liked the pulley action and exercise changes after about a month. Both entries identify the upgraded K6-2.0 Ultra family, without establishing the red Amazon variant. These reports help identify questions to ask, while leaving the K6/K8 mismatch unresolved.
For an initial layout, allow at least the maker's 62.3-inch width plus loading and access space, then obtain the delivered drawing. Amazon's 56.5-inch width is too uncertain for a tight fit. The maker's 2:1 pulley claim means ideal handle resistance is half the loaded weight before friction. Its 600-pound trolley claim rates loading, with separate claims of 1,500 pounds for J-hooks and 1,200 pounds for safeties. All must match the supplied parts. The original K6's no-bolt statement gives no installation permission for this generation, and the bench, free bar and plates remain separate.
Pros
- Adjustable front cable outlets permit different exercise starting heights
- Listed flip-down safety arrangement differs from the original K6 rod layout
- Supplied sandwich J-cup supports form the selected free-bar starting points
- Included leg-bracing attachment design supports the intended pulldown setup
- Documented 2-to-1 pulley relationship separates loading from ideal handle resistance
- Rack-only purchase configuration choice avoids buying another bench by default
- Combined cage and cables keep both functions in one planned station
Cons
- Exact generation, overall width and anchoring requirements need manufacturer confirmation.
Final Verdict
I would consider the K6 2.0 for adjustable cable work alongside free-bar lifting only after confirming generation, width and installation. Compare the catch-to-cable changeover as well as the exercise list. Choose a fully documented alternative if the supplied configuration remains uncertain.
4. Sunny SF-XF9933 + SF-XF9927 [Alternative for High and Low Pulls]
Our Score: 5.0/10 ★★★★★★★★★★ · Research-based · Provisional
The compatible Sunny pair adds fixed high and low pulls while retaining an existing bench. Separate purchases, substantial clearance and unconfirmed complete footprint and catch limits make the combined-station recommendation provisional.
Retained lower-scoring alternative, assessed October 16, 2026. This does not meet the current Top 3 eligibility standard.
I prefer the Sunny pairing when pulldowns and low rows fill the gap in an existing barbell program. You buy the SF-XF9933 rack and SF-XF9927 lat attachment separately and can keep a suitable bench you already own. Before ordering both, confirm the complete installed footprint and permitted catch load, which the bare rack size and 1,000-pound unit figure leave unanswered.

Shop on Amazon SF-XF9933 RackShop on Amazon SF-XF9927 Lat Attachment
Sunny SF-XF9933 + SF-XF9927 Specs
| Required purchases | SF-XF9933 rack + SF-XF9927 lat attachment |
|---|---|
| Bare rack size | 50.5 L x 65 W x 87 H in; not complete setup |
| Rack unit limit | 1,000 lb; separate catch rating unconfirmed |
| Lat attachment limit | 200 lb |
| Rack settings | 18 hook/bar settings |
| Bench, free bar and plates | Separate |
| Manual access clearance | At least 4 ft around equipment |
| Observed base-package price | $499.99 rack + $269.00 lat = $768.99; two Amazon US listings, October 16, 2026 |
| Investment Level | $$ |
Key Features:
- Fixed high and low outlets: provide starting positions for pulldowns and low pulls.
- Included rack supports: adjustable J-hooks and safety bars come with the half rack.
- Compatible attachment: the SF-XF9927 manual specifically includes installation on the SF-XF9933.
- Separate purchases: let you choose a bench for your body and pressing setup, or keep one you own.
Fixed high and low outlets keep the cable choice fairly clear. They suit a routine built around pulldowns, rows and other pulls from those positions. If your planned movements need the cable to start at shoulder or waist height, I would compare the Mikolo's adjustable outlets before committing. Buying a simpler system makes sense when you use its available positions, rather than repeatedly adapt exercises to a cable height you did not want.
Dennis K.'s 2020 owner report on the exact SF-XF9933 listing says they also bought the lat attachment and were satisfied with the combined setup. Daniel liked the rack but reported missing J-hooks on delivery. Those are maker-origin reviews syndicated by Walmart, not independent retailer tests. Inventory both boxes before assembly. An attachment can arrive intact while a missing support in the rack box still prevents the lifting setup you planned.
Why We Chose This
I chose the SF-XF9933 plus SF-XF9927 for free-bar supports with fixed high and low pulls. It leaves the Smith mechanism and included bench out of the Marcy purchase. It also avoids paying for adjustable cable origins when the program needs only those two positions. My comparison uses the two Sunny component prices together, since the rack by itself provides no lat-pulldown system.
On the SF-XF9927 page at Lowe's, Randal P. described straightforward assembly and liked the cable movement and exercise variety. Johnson C. reported making it part of their weekly routine. Their reports are syndicated from Sunny, with the exact host rack unspecified. These accounts concern the attachment, while the manual establishes its compatibility with the SF-XF9933. Keep cable loading within the attachment's published 200-pound limit.
The finished layout still needs a drawing. The 50.5-by-65-inch bare rack dimensions leave out the installed lat attachment, and both manuals require at least four feet of free space around the equipment. Check where the bench's rear foot sits, where plates load and where your legs go for rows. The supplied safety bars have no separately confirmed catch rating here. For resistance-band use, the rack instructions require sufficient ballast and bolting to the ground, with floor fasteners bought separately. Confirm both model numbers, then add your bench, free bar and plates to the purchase plan.
Pros
- Fixed high cable outlet provides the intended pulldown starting position
- Included low pulling position adds rows to the compatible station
- Supplied rack J-hook supports cover adjustable bar-support positions
- Rack includes safety bars for use within its instructions
- Explicit manual compatibility listing connects the exact two component models
- Separate optional bench purchase lets you retain a suitable existing bench
- Published 200-pound attachment limit gives the lat system its own loading boundary
Cons
- The rack and lat attachment are separate purchases. Catch capacity and the complete installed footprint remain unconfirmed.
Final Verdict
I would choose Sunny for barbell training with fixed high and low pulls. Buy both components and confirm the complete footprint and catch limit first. Keep the 200-pound lat limit and band-use anchoring instructions in the plan, and choose adjustable outlets when your exercises need them.
Shop on Amazon SF-XF9933 RackShop on Amazon SF-XF9927 Lat Attachment
Why the GPR400 Setup Might Be the Best Choice for a Permanent Home Rack
I would compare the Body-Solid setup with the F22 by writing out a session that moves from barbell work to two or three cable exercises. If those pulls all work from fixed high or low outlets, the SP150 selector pin removes loose-plate changes while keeping the outlet positions fixed. If a fly or press needs the cable to start near shoulder height, the F22's adjustable outlets solve a problem the selector stack cannot. Its two plate carriages then need loading space and repeated plate changes.
For the Body-Solid choice, keep the 81-inch depth, bench position and overhead reach in the same layout. No leg restraint is included, and the numerical handle ratio remains unconfirmed. Choose a separately documented pulldown arrangement if heavy seated pulls are the main reason for buying.

Shop on AmazonBody-Solid GPR400; cage onlyShop on AmazonRequired separate GLA400 high/low cable attachmentShop on AmazonRequired separate SP150; fifteen 10 lb plates only
How to Choose the Best Power Rack With a Pulley System
The F22 adds independently loaded adjustable cables with supplied safety arms, while CHEETAH adds a folding arrangement. Both use loose plates in these exact selections; CHEETAH remains conditional because safety bars are excluded and the complete approved catch plan is unresolved.
Compare the Cable Function and the Whole Purchase
A power rack with a cable system needs two usable setups: the lifting position and the cable exercise position. An adjustable cable outlet changes the starting angle; a fixed lat station concentrates on high and low pulls. The Marcy adds a Smith station and a bench, so its purchase and room plan differ from a rack-only offer.
| Measure | Marcy SM-4033 | Mikolo K6 2.0 red | Sunny rack + lat attachment |
|---|---|---|---|
| Cable layout | Adjustable crossovers and low pulley | Adjustable front cable outlets | Fixed high and low outlets |
| Cage/station dimensions | 83.5 by 67.8 in footprint; 86.2 H | Maker: 67.5 D x 62.3 W x 86.5 H in; conflict below | Bare rack: 50.5 L x 65 W x 87 H in; complete drawing needed |
| Bar/catch limits | 300 lb | Maker claims: J-hooks 1,500 lb; safeties 1,200 lb | 1,000-lb rack unit; separate catch limit unconfirmed |
| Cable loading | 300 lb trolley total; 150 lb each side | 600 lb trolley, maker graphic | 200-lb lat attachment |
| Bench | Included; 600 lb user + weights | Separate | Separate optional purchase |
| Main unresolved purchase issue | Fit the bench and desired free-bar position | Exact assembly/anchoring permission and overall width | Buy rack and lat separately; verify complete size and catch limit |
The Marcy limits come from its owner's manual. The current K6-2.0 Ultra specifications provide Mikolo's manufacturer claims; confirm that the supplied K6 2.0 parts carry those limits. Sunny's rack manual states a 1,000-pound unit limit, and its compatible lat attachment has a separate 200-pound limit. Those numbers do not establish a separate Sunny catch rating or a strongest-rack ranking.
For the K6 2.0, Amazon lists 67.5 D x 56.5 W x 86.4 H inches, while the maker lists 62.3 inches overall width. Allow at least the maker's 62.3-inch width in an initial room plan, plus loading and access space. The Amazon technical table also labels the model K8 and part A-K8-R despite its K6 2.0 title. Ask Mikolo to identify the exact generation and provide its dimensioned drawing before ordering. Also obtain its exact assembly and anchoring requirements; I could not verify model-specific anchoring permission in the public documentation.
Choose the Cable Exercises First
Choose fixed high and low outlets for the pulls they cover; choose adjustable outlets when starting height changes the exercise you want. A power rack functional trainer combination can place the cable near shoulder, waist or ankle height. A lat attachment normally provides a high pull and low row without that same height adjustment. Neither layout becomes a better purchase simply because its advertisement names more exercises.
I would write down the cable exercise selection before choosing an all-in-one power rack. If the gap is pulldowns and rows, the simpler arrangement may cover it. If you want cable flyes, presses and other starting angles, compare adjustable outlets and their actual travel. Choose the Marcy's Smith station only when guided lifting is useful alongside the free-bar and cable work.
- Choose fixed high and low outlets for pulldowns and rows.
- Choose adjustable outlets when other starting heights serve the program.
Understand the Pulley Ratio
Loading weight and handle resistance are different measures. For a stated 2:1 system, 100 pounds loaded produces an ideal 50 pounds at the handle, before friction. That arithmetic describes the mechanism; it does not mean every outlet on every station uses the same ratio. The Marcy SM-4033 manual gives an approximate full-load relationship at its low pulley and half-load relationship at each crossover handle.
Keep the Mikolo trolley's published 600-pound loading claim separate from a handle-resistance claim. Also check how the two cable ends share the loading system. Two handles do not establish two independent weight stacks or permission for two people to train together. Choose the exercise position and loading procedure in the exact instructions rather than guessing from the cable count.
- Separate trolley loading from handle resistance.
- Check the stated ratio at each outlet.
Measure Cable Travel, Loading and Bench Access
Mark the machine, bench and lifter using the rack working dimensions, then allow access to the loading sleeves and catches. The Marcy bench measures 63 by 26.4 inches separately from the station. Moving it for standing cable work needs another usable position. For any cage, confirm that the bench reaches the desired bar position without its rear foot or the cable station blocking it.
Before ordering the K6 2.0, obtain its exact drawing and written assembly or anchoring requirements from Mikolo. The original K6's no-bolt statement does not establish permission for this generation. Check these three working positions with the intended bench and attachments:
- Barbell lift: the bench reaches the bar while the catches can sit at the required height.
- Cable movement: your body and the handle can travel through the exercise without hitting the bench, frame or stored equipment.
- Loading and changes: plates slide onto the sleeves and you can reach adjustment pins without moving through a loaded bar.
Compare Component Limits and the Finished Cost
Keep the user's limit, bar supports, catches, trolley and bench limit on separate lines. The SM-4033 manual permits 600 pounds on the bench including the user and weights; its bar and catch limits remain 300 pounds. A higher bench figure does not raise the catch limit. The same manual gives 100 pounds per storage post, despite a larger storage figure on the marketing page.
Add the free bar, plates, collars, bench if separate, delivery, assembly and any required installation to the machine price. An all-in-one label does not mean weights are included. The Marcy supplies a guided Smith bar, but a separate free bar remains another purchase. Check the exact contents and seller terms at ordering; no current price ranking is implied here.
If you already own a rack, a power rack cable attachment may be worth comparing with replacing the whole frame. Use an attachment the maker approves for the exact model and configuration. Otherwise, compare a different barbell rack configuration or, when barbell supports are unnecessary, a dedicated functional trainer. Those are different purchases serving different needs.
- Keep user, bench, bar, catch and trolley limits separate.
- Add every required component, delivery and installation to the total.
My Overall Verdict
The documented Body-Solid cage, high/low attachment and selector stack is my choice for a permanent mixed barbell-and-cable station within its stated limits. Compare the F22 if moving the cable origin is important to your exercises, and the CHEETAH if folding changes how the room can be used. Price the complete station and the changeover between lifts; resolve the exact safety and anchoring requirements before treating extra functions as a useful upgrade.
The other models have lower or provisional scores and do not meet the same recommendation standard.
- Body-Solid GPR400 + GLA400 + SP150 Stack - Qualified Choice With a Selector Stack

Shop on AmazonBody-Solid GPR400; cage onlyShop on AmazonRequired separate GLA400 high/low cable attachmentShop on AmazonRequired separate SP150; fifteen 10 lb plates only
FAQs
Is a lat-pulldown rack the same as a functional trainer?
A fixed lat-pulldown rack provides different cable positions from a functional trainer with adjustable outlets. High and low outlets cover pulldowns and rows, while adjustable outlets offer other starting heights.
What does a 2:1 pulley ratio mean?
A 2:1 pulley ratio means ideal handle resistance is half the loaded weight before friction. For example, 100 pounds loaded corresponds to an ideal 50 pounds at the handle, but check the exact outlet because ratios can differ within a station.
Does the rack's capacity also apply to the cables?
A rack's capacity does not automatically apply to its cable trolley, catches or other components. Follow each part's limit and installation instructions instead of using a whole-frame claim as a failed-lift catch rating.
Can I add a cable system to a rack I already own?
You can add a cable system when the maker approves the attachment for your exact rack and configuration. Check mounting points, travel, loading access and bench or catch interference, since matching upright dimensions alone is insufficient.
Does a rack with cables include weights and a barbell?
A rack with cables includes weights or a free bar only when the exact package lists them. The Marcy includes a guided Smith bar and bench, while the separately purchased Sunny rack and lat attachment exclude a bench and these configurations require a separate free bar and plates.
How I Scored These Rack and Pulley Setups
These are research-based editorial scores for the stated use, separate from customer averages and reliability predictions. The complete Body-Solid configuration, F22 and CHEETAH were assessed October 18, 2026; Marcy, K6 and Sunny were assessed October 16. Each review keeps the exact mounting and catch limitations that affect the buying decision.
I assign integer grades from 0 to 5: 5 means very strong supported fit without a material unresolved limitation in that criterion; 4 means strong with manageable disclosed limits; 3 means workable with important tradeoffs; 2 means substantial restrictions; 1 means a material unresolved question; 0 means documented inability to serve the stated use. Intended-use fit weighs 40%, home practicality 25%, ownership tradeoffs 20%, and evidence/offer clarity 15%.
Formula: 2 x (0.40 x fit + 0.25 x home + 0.20 x ownership + 0.15 x clarity), rounded once to the nearest 0.5 using decimal half-up. Provisional scores are capped at 6.0/10 for unresolved identity, an essential configuration/load/mounting fact or contradictory critical operating facts that prevent a confident recommendation. Ordinary room checks and older owner evidence alone do not trigger that cap. Awards reflect uses, not necessarily descending scores.
| Configuration | Fit 40% | Home 25% | Ownership 20% | Clarity 15% | Raw / rounded | Status |
|---|---|---|---|---|---|---|
| Body-Solid GPR400 + GLA400 + SP150 Stack | 5/5 | 3/5 | 4/5 | 4/5 | 8.30 / 8.5 | Research-based |
| Marcy SM-4033, Red | 4/5 | 2/5 | 3/5 | 4/5 | 6.5/10 | Research-based |
| Mikolo K6 2.0, Red Rack Only | 2/5 | 2/5 | 2/5 | 1/5 | 3.5/10 | Provisional |
| Sunny SF-XF9933 + SF-XF9927 | 3/5 | 2/5 | 3/5 | 2/5 | 5.0/10 | Provisional |
| Major Fitness F22 Standard, Black Rack Only | 4/5 | 3/5 | 3/5 | 4/5 | 7.10 / 7.0 | Research-based comparison |
| Mikolo CHEETAH Original, Black Rack Only | 3/5 | 2/5 | 3/5 | 2/5 | 5.20 / 5.0 | Provisional comparison |
Major Fitness F22 Standard, Black Rack Only: score reasoning
Fit: 4/5. Supplied J-hooks, safety arms and two adjustable plate-loaded cables support combined barbell and accessory work; 2:1 loading and fixed frame height limit some routines.
Home practicality: 3/5. The maker 64.2 W x 58.2 D x 82.5 H inch envelope needs permanent floor space, loading access and an actual reach check.
Ownership: 3/5. Two separate plate carriages, substantial assembly, regular cable care and a one-year listed parts policy create important ownership work.
Evidence and offer clarity: 4/5. The exact black standard rack-only child, maker standard documentation and linked original manual agree on the basic system; older owners and pooled family reviews remain bounded evidence.
Raw 7.10/10, rounded once with decimal half-up to 7.0/10.
Mikolo CHEETAH Original, Black Rack Only: score reasoning
Fit: 3/5. Adjustable dual cables and bar supports offer useful combined functions, but the base excludes a documented complete failed-lift catch system.
Home practicality: 2/5. Structural wall mounting, a changing 48-83.5-inch width and plate-loading access impose substantial room restrictions.
Ownership: 3/5. Hand-adjusted feet, manual folding and separate plates, bar and bench add changeover work; original maker-hosted owners describe foot adjustment and pulley friction.
Evidence and offer clarity: 2/5. The original 1:1 black child is identified separately from 2.0 variants; missing approved catches and unavailable exact-generation assembly instructions prevent a complete barbell recommendation.
Raw 5.20/10, rounded once with decimal half-up to 5.0/10; provisional because the complete configuration conditions above remain unresolved.
Reasons for the four current grades
Fit: 5/5. A cage with supplied hooks/catches plus a documented high/low pulley and fifteen-plate selector stack strongly supports ordinary barbell and cable accessory training. The original same-system owner reports smooth operation and easier selector changes than plate loading. This is a high/low station, not a two-handle functional trainer. Heavy seated pulldowns require appropriate restraint; none is included and no unverified accessory is recommended.
Home: 3/5. Use the current attachment envelope of 81 D x 53 W x 80 H inches, not the marketing claim of no extra space. The heavy cage, stack assembly and working access need a permanent room commitment; the low frame may constrain tall users' overhead reach. These are important tradeoffs:3/5.
Ownership: 4/5. The installed SP150 stack removes repeated plate changes from cable work, and GLA400 supplies lat and low-row bars plus the stack mechanism. Parts/manual support and cable-tension adjustment are documented. Pin-and-pipe catches, three separately delivered components and maintenance remain manageable. The maker lifetime home warranty requires authorized purchase, correct assembly, original receipt and prepaid claim freight; seller authorization is not assumed:4/5.
Clarity: 4/5. All three exact new Amazon component offers are verified and the actual GLA400 manual establishes the fifteen-plate stack installation with its supplied rods/top plate. SP150 is correctly identified as plates only. No numerical handle-load or plate-carriage-maximum claim is made where maker documentation does not provide it. Current specific dimensions replace contradictory space-saving marketing. These ordinary published-detail limits and small owner samples justify 4/5, not a provisional essential-identity cap.
The recommended high/low setup uses the explicitly approved SP150 stack. Its handle-resistance ratio and plate-carriage maximum remain unconfirmed.
Retained provisional alternative: Mikolo K6 2.0 remains capped at 6.0/10 for the unresolved cable configuration and operating-limit details explained in its review.
Individual owner reports are attributed and cannot establish defect rates. Customer rating counts are global listing aggregates, can pool variants and are not counts of written or verified-purchase reviews.

