Bells of Steel Barenaked Powerlifting Bar 2.0
20 kg Barenaked 2.0 | 29 mm / about 86.6 in | 16.94 in maker specification | Bare-steel shaft /…
As an Amazon Associate I earn from qualifying purchases. Read our disclosure.
Choose a barbell for the lifts you plan to do, the plates you own, and the rack and floor space available at home. Compare straight, shorter, and specialty bars by their actual dimensions and intended use.
20 kg Barenaked 2.0 | 29 mm / about 86.6 in | 16.94 in maker specification | Bare-steel shaft /…
A compact 25 lb straight barbell for 2-inch Olympic plates. Check the space between its sleeves before planning rack exercises.
20 kg Bright Chrome, center knurl | 29 mm / 86.6 in | 16.3 in, Olympic plates | Medium volcano…
20 kg Hard Chrome | 28 mm / about 52 in | 16.4 in loadable sleeves; Olympic plates | Hard-chrome…
A 35 lb Olympic bar for home squats, presses and rows, with bronze bushings, center knurling and a seller-listed 500…
A 47-inch black EZ curl bar for plate-loaded arm work, with rotating Olympic sleeves and a seller-listed 200 lb capacity.
A 28 lb enclosed trap bar for deadlifts, shrugs and carries, with raised neutral-grip handles and a seller-listed 500 lb…
A 19 lb chrome Olympic curl bar with a 28 mm shaft, 6.25-inch sleeves and a seller-listed 450 lb capacity.
A 20 kg black hex bar with standard-height handles, 10-inch sleeves and a seller-listed 750 lb capacity.
A full-length Olympic bar with a 28 mm shaft and brass bushings. XMARK lists 42 lb; Amazon lists 20 kg.…
A compact straight Olympic bar with a 25 mm shaft and a seller-listed 350 lb capacity. This silver 4 ft…
Start with your training setup. A useful bar needs to fit your hands, plates, rack, and room before its finish or headline rating matters.
Compare the manufacturer’s intended use with your routine. A straight bar, curl bar, and trap bar have different shapes and grip positions. A short bar can suit a small room, but it still needs enough distance between the sleeves to sit correctly in your rack. Compare the straight-bar picks for full-length rack use or compact accessory work.
Check total length and the usable distance between the sleeves separately. Allow space on both sides to load plates and move around the setup.
Match the sleeve diameter to the opening in your plates and the collars you will use. Compare usable sleeve length with the thickness of your planned plate stack, leaving room to secure it.
Confirm whether the listing is for a bar alone or a package with plates and collars. Include the bar’s own weight when planning your starting load.
A steel tensile-strength figure and a stated load capacity describe different things. Follow the exact bar’s published use and handling guidance; neither a coating nor a large headline number establishes permission to drop it.
| Criterion | What to check |
|---|---|
| Training | Is this shape and intended use suitable for your planned lifts? |
| Rack fit | Does the usable shaft span your rack supports correctly? |
| Plate fit | Do sleeve diameter and usable length match your plates and collars? |
| Grip | Do shaft diameter and knurling placement suit your grip positions? |
| Room fit | Is there clearance at both ends for movement and loading? |
| Package | What is included, and what care and warranty terms apply? |
No. Compare the usable shaft length between the sleeves with the spacing of your rack supports. Overall bar length alone does not establish rack compatibility.
Check their opening against the exact bar’s sleeve diameter, then check that the planned stack and collars fit the usable sleeve length.
It can save room at the ends, but it may change rack fit or loading space. Measure your complete setup and check the bar’s intended use before choosing it.
Yes. Plan the total load using the published weight of the bar plus the plates you add. Confirm that a product listing describes the bar alone or the complete package.